Applied Technologies, LLC

STS 115 Foundation Waterproofing Sprayer

  • 115 Gal. Heated Tank
  • Graco GMax II 7900 Pump
  • 150′ Insulated and Skuff-Guarded Hose
  • Heat Exchanger heats the waterproofing material
  • Electric Hose Reel
  • Sprays solvent- or Water-based foundation waterproofing material
  • 2 Year Limited Warranty

Select a tab for more product information:

Compact Sprayer & Tank in One

The STS 115 Sprayer will spray solvent or water-based emulsion polymer modified asphalt foundation waterproofing. It mounts to a pickup truck and is an excellent sprayer for both a novice or experienced basement contractor. The unit will spray 1-3 residential basements on a tank of material.

*Intended for use on a 3/4 ton payload or more truck.

Spray up to 1000 Sq. Ft. Per Hour

Spray up to 1000 sq. ft. per hour with our waterproofing sprayer. A typical new home has a basement with 1000 sq. ft. of waterproofed area.

115 Gallon Heated Tank

Especially for solvent-based materials, the tank increases your productivity by heating the waterproofing material while you drive to the jobsite. Heat tubes are inside the tank and are surrounded by your material for increased heating. As your business grows, simply add another tank for even more capacity.

Heating is done by circulating your truck’s engine coolant through tubes inside the tank.

Long Hose Reach

With 150′ of insulated hose, you can spray jobs without having to move your truck. The insulation maintains heat in cold weather and the scuff-guard protects the hose from abrasion. After use, wind-up is easy with the electric hose reel.

Powerful and Dependable Pump

The Graco Gmx II 7900 pump provides 3300 psi and 2.2 gpm. This is up to 40% more capacity than the competitor’s pumps. A Honda 6.5 HP engine guarantees easy start up every time.

  • Endurance MaxLife Piston Pump
  • Honda GX Engine and Advantage Drivetrain
  • SmartControl 3.0
  • 2.2 GPM
  • 3300 Max PSI


Material Heating System

Foundation waterproofing must be heated to the proper temperature for spraying. Our system uses the truck’s cooling system water to heat the tanks. This is safe, dependable and is the quickest way to heat the material.

A 1.5″ pipe inside the tank is surrounded by the waterproofing material. The temperature of the tank can be easily regulated and adjusted.

A heat exchanger also connected to the truck’s cooling system raises the waterproofing to the final spray temperature. This is regulated and adjustable for varying job site conditions.


37″ Front to Back x 68″ Wide

Weight is approximately 2200 lbs loaded