Applied Technologies, LLC
1-877-APPLY-IT

PRO 115 Foundation Waterproofing Sprayer

Our most versatile foundation waterproofing sprayer.  The PRO 115 can be mounted in a pick up truck, on a flat bed truck or inside a box van.

  • 115 Gal. Heated Tank
  • Graco GMax II 7900 Pump
  • 150′ Insulated and Skuff-Guarded Hose
  • Heat Exchanger heats the waterproofing material
  • Electric Hose Reel
  • Sprays solvent- or Water-based foundation waterproofing material
  • 2 Year Limited Warranty

Select a tab for more product information:

Description

The PRO 115 is our most versatile foundation waterproofing sprayer.  It can be mounted in a pick-up truck bed, on a flat bed or inside a box van.

Simply connect the PRO 115 to your truck’s cooling system to allow it to heat your waterproofing materials to their proper temperature.

Spray up to 1000 Sq. Ft. Per Hour

Spray up to 1000 sq. ft. per hour with our waterproofing sprayer. A typical new home has a basement with 1000 sq. ft. of waterproofed area.

115 Gallon Heated Tank

Especially for solvent-based materials, the tank increases your productivity by heating the waterproofing material while you drive to the jobsite. Heat tubes are inside the tank and are surrounded by your material for increased heating. As your business grows, simply add another tank for even more capacity.

Heating is done by circulating your truck’s engine coolant through tubes inside the tank.

Long Hose Reach

With 150′ of insulated hose, you can spray jobs without having to move your truck. The insulation maintains heat in cold weather and the scuff-guard protects the hose from abrasion. After use, wind-up is easy with the electric hose reel.

Powerful and Dependable Pump

The Graco Gmx II 7900 pump provides 3300 psi and 2.2 gpm. This is up to 40% more capacity than the competitor’s pumps. A Honda 6.5 HP engine guarantees easy start up every time.

  • Endurance MaxLife Piston Pump
  • Honda GX Engine and Advantage Drivetrain
  • SmartControl 3.0
  • 2.2 GPM
  • 3300 Max PSI

Material Heating System

Foundation waterproofing must be heated to the proper temperature for spraying. Our system uses the truck’s cooling system water to heat the tanks. This is safe, dependable and is the quickest way to heat the material.

A 1.5″ pipe inside the tank is surrounded by the waterproofing material. The temperature of the tank can be easily regulated and adjusted.

A heat exchanger also connected to the truck’s cooling system raises the waterproofing to the final spray temperature. This is regulated and adjustable for varying job site conditions.

 

 

Downloads

Photos

You may also like…