, ,

60′ Contractor Peel Paste Polyurethane Foundation Crack Repair

$810.95 USD

Easy to use kit stops leaks in concrete foundation cracks.

  • Improves the air quality of the building-eliminates musty odors from leaks
  • Removable Peel Paste surface sealer for when appearance matters.
  • Increases the home value
  • Fastest setting repair kit-One hour total time
  • Ultra thin Hydra Stop 300 polyurethane resin gets into tight cracks
  • Works on cracks in corners corners too

Features

  • Easily removed Peel Paste grey surface sealer and port adhesive
  • Repairs approximately 60′ of concrete basement wall crack.
  • Professional Spring Drive Injection Gun for smooth application
  • Fastest setting repair materials
  • Ultra thin Hydra Stop 300 polyurethane resin gets into tight cracks
  • Works on cracks in corners corners too
  • Wide based surface and corner injection ports

Advantages

  • Easily removed grey Peel Paste surface sealer and port adhesive
  • Exclusive tight fitting injection ports seal tightly to static mixers for a quality injection
  • Stops leaks in a concrete basement crack
  • Materials for approxamtely 60′ of leaking crack
  • Repair concrete crack from inside the basement
  • Fills the entire foundation crack
  • Same materials the pros use
  • Video instructions
  • No drilling of the concrete crack required
SKU: AT-JLQ45988 Categories: , ,

Select a tab for more product information:

Professional Materials Stop Leaks-Easily Removed Surface Paste

The 60′ kit is the largest leak repair system that uses Hydra Stop 300 and Peel Paste removable surface sealer and port adhesive.  When stopping concrete crack leaks and the appearance matters use the Peel Paste polyurethane foam kit. Hydra Stop 300 expanding polyurethane foam stops the water from leaking into the basement. Peel Paste surface port and crack seal adhesive is then simply peeled off the concrete surface. The plastic surface ports will come off too. The Spring Drive Gun gives a smooth and continuous flow of the Hydra Stop 300 into the crack. This ensures that the crack is filled entirely the length of the crack. After curing the crack will not leak water.

Includes

  • Instructional Video
  • 6Cartridges Peel Paste Surface Sealer
  • 6Cartridges of Hydra Stop 300 Hydrophobic Polyurethane Foam
  • 1 Spring Drive Dual Cartridge Injection Gun
  • 80 Surface Ports
  • 30 Corner Ports
  • 20 Mixing Bowls
  • 12 Static Mixers
  • 40 Stir Sticks
  • 20 Pairs Latex Gloves
  • 1 Hose Assembly
  • 1 Plano Tool Box

Application & Coverage

Suitable for application in concrete cracks 1/32” to 1/4” in width. Concrete should be above 40 F. Can be used to stop leaks in dry or wet cracks. Surface of the concrete must be dry for use.

Where to Use

  • Cracks wider than 1/32″ (thickness of a fingernail)
  • Concrete cracks in basement walls
  • Retaining walls
  • Sewers

Use from the basement interior only when repairing a basement wall crack.

Repair Process

Hydra Stop 300 is a low viscosity liquid polyurethane. Once inside the crack, the Hydra Stop begins to foam and expand. This expansion completely fills the crack and stops water.Step

1. View the video included with the kit

2. Attach surface or corner ports over the foundation crack using Poxy Paste Crack Seal & Port Adhesive

3. Cover the entire foundation crack with Poxy Paste Crack Seal & Port Adhesive

4. Inject liquid Hydra Stop 300 polyurethane crack injection resin into the foundation crack with a caulk gun

5. Place caps into the surface or corner ports to seal them

6. Remove the Peel Paste Surface Sealer and Port Adhesive

Cured Hydra Stop 300

This is an example of the fully cured Hydra Stop 300. It remains flexible and forms a closed cell structure.

You may also like…