Non-Flowable Epoxy for Wide Cracks
A-Tech 0101 Gel is a two component, 100% solids moisture insensitive epoxy. It meets ASTM C-881. The product exhibits a non-flow property when uncured. This means the product will not flow out of cracks prior to curing. It is recommended for use in cracks greater than 5/16” wide.
8 cartridges per box
Mixes 2:1
300cc x 150 cc Cartridge
Uses 1224 (1/2″ x 24 element) static mixer
Won’t Flow Prior to Cure
The greatest benefit of A-Tech 0101 Gel is that it will not flow out the rear of a foundation crack before it fully cures. Its thick, paste like consistency exhibits no flowability unless under pressure from pulling the trigger on the injection gun. Other epoxies can leak out the rear of the crack into the gravel backfill or down inside the crack and out under the slab.