Applied Technologies, LLC
1-877-APPLY-IT

A-Tech 0101 Gel

$210.00

  • Exhibits non-flow property uncured
  • Structurally reinforce concrete
  • Stops water leaks

Non-Flowable Epoxy for Wide Cracks

A-Tech 0101 Gel is a two component, 100% solids moisture insensitive epoxy. It meets ASTM C-881. The product exhibits a non-flow property when uncured. This means the product will not flow out of cracks prior to curing. It is recommended for use in cracks greater than 5/16” wide.

8 cartridges per box

Mixes 2:1

300cc x 150 cc Cartridge

Uses 1224 (1/2″ x 24 element)  static mixer


Won’t Flow Prior to Cure

The greatest benefit of A-Tech 0101 Gel is that it will not flow out the rear of a foundation crack before it fully cures. Its thick, paste like consistency exhibits no flowability unless under pressure from pulling the trigger on the injection gun. Other epoxies can leak out the rear of the crack into the gravel backfill or down inside the crack and out under the slab.

Where to Use

Use on foundation cracks where leakage of injected material out of the crack is possible.

  • Large concrete cracks >5/16″
  • Delaminated concrete
  • Poured concrete foundation cracks
  • Concrete wall cracks

A-Tech 0101 Gel is part of the Applied Technologies Cartridge System of concrete crack injection. Use with surface injection ports, surface pastes and other accessories.

Downloads

You may also like…