Foundation & Basement Waterproofing Sprayer
A foundation waterproofing sprayer makes the application of foundation waterproofing a labor saving process. The foundation waterproofing spray equipment heats the materials to the correct temperature, using your truck's cooling system. These waterproofing spray units can be used for either solvent- or water-based waterproofing materials.
Become an Applied Technologies Waterproofing Contractor
Foundation Waterproofing Material
Applied Technologies offers several polymer-modified asphalt foundation waterproofing products. These foundation waterproofing sprayers can spray any of these products. Click here to learn more about foundation waterproofing.
DTS 240 Foundation & Basement Waterproofing Sprayer
Resources
The DTS 240 is a complete waterproofing spray unit with dual 118 gallon heated waterproofing material tanks. Each tank has its own heat control, waterproofing material on-off and material recirculation lines. This allows an applicator to spray two different waterproofing materials with the same waterproofing spray unit. The DTS 240 uses a graco Gmax II 7900 pump, heat exchanger and 150' of insulated and skuff-guarded hose.
When ordering, please specify if you will be using water-based waterproofing material or solvent based waterproofing material.
Features:
- Dual 118 Gallon Heated Tanks
- Electric Hose Reel
- 150' Insulated Hose (1/2" x 100' and 3/8" x 50' Complete Spray Hose)
- 2 Heated Tanks
- Heat Exchanger
- Graco Gmax II 7900 Pump
Dimensions: 48" Front to Back x 96" Wide
STS 115 Foundation & Basement Waterproofing Sprayer
Resources
The STS 115 is a complete waterproofing spray unit with a tank and pump efficiently packaged for use in a pick-up truck. All of the equipment is housed inside the unit to keep it protected from the elements. Simply connect to your truck's cooling and electrical systems to begin spraying.
When ordering, please specify if you wil be using water-based waterproofing material or solvent-based waterproofing material.
Features:
- 115 Gallon Heated Tank
- Electric Hose Reel
- 150' Insulated Hose (1/2" x 100' and 3/8" x 50' Complete Spray Hose)
- Heat Exchanger
- Graco Gmax II 7900 Pump
- Expand Capacity With a 118 Gallon Tank (see below)
Dimensions: 37" Front to Back x 68" Wide
E-Z Foundation and Basement Waterproofing Sprayer
Resources
The E-Z Foundation Waterproofing Sprayer can be mounted in a box van, pick-up truck, or flat bed vehicle. The innovative design allows waterproofing materials to be sprayed directly from drums, totes or it can be connected to a 118 gallon material tank. Simply connect the E-Z Foundation Waterproofing Sprayer to your trucks cooling system to begin using.
When ordering, please specify if you wil be using water-based waterproofing material or solvent based waterproofing material.
Features:
- Electric Hose Reel
- 150' Insulated Hose (1/2" x 100' and 3/8" x 50' Complete Spray Hose)
- Heat Exchanger
- Graco Gmax II 7900 Pump
- Connect to Drum, Tank or Tote
Dimensions: 59" Tall x 36" Wide x 24" Front to Back
118 Gallon Waterproofing Material Tank
For use with either the E-Z spray unit or STS 115. As your business grows, there is no need to purchase an entire spray system, simply add capacity with more or larger tanks. The insulation and large internal heat tube quickly heats solvent-based materials to their proper spray temperature.
The internal heat tube connects to your truck's coolant system. The coolant heats the materials to the proper temerature. The insulated walls speed the heating process for a low cost.
Features:
- Double Walled Construction
- Insulated
- Internal Heat Tubes
- Temperature Gauge
