Click the above link to view how to perform a foundation crack repair using a hydrophobic polyurethane foam.

Click for Foundation Crack Repair Material and Repair Kits

Gun accepts 300cc x 300cc and 300cc x 150cc dual cartridges.  Spring drive provides a smooth and continuous flow of foundation crack repair materials into foundation cracks for even distribution.

• Spring drive gives smooth, even flow into foundation crack 
• Fits 300cc x 300cc and 300 cc x 150cc cartridges
• Use to dispense Foundation Crack Surface Sealer, Polyurethane Crack Injection Foam, Epoxy Crack Injection Resin or Dowel Rod Epoxy

All three rods push on washers at the same time for ease of dispensing.  Washers have follower plates to stabilize cartridge.  Dual 300cc x 300cc cartridge only.

• Fits 300cc x 300cc cartridges
• Use to dispense Foundation Crack Surface Sealer, Polyurethane Crack Injection Foam, Epoxy Crack Injection Resin or Dowel Rod Epoxy

Used to get foundation crack injection materials into a crack.  Attach to concrete crack surface using surface sealer epoxy.  Large base provides excellent adhesion to concrete foundation crack surface.  Large diameter opening minimizes back pressure and "blowouts."  Cap fits tightly and stops concrete crack injection material from flowing out of foundation crack before it cures.

250/Box

Innovative base design allows port to be mounted on an inside or outside corner.  Used to get foundation crack injection materials into a crack.  Attach to concrete crack surface using surface sealer epoxy.  Large base provides excellent adhesion to concrete foundation crack surface.  Large diameter opening minimizes back pressure and "blowouts."  Cap fits tightly and stops concrete crack injection material from flowing out of foundation crack before it cures.

                                                                                                                                                                           250/Box

Static Mixers provide excellent mixing of crack injection materials.  They attach to the top of cartridges and fit tightly to surface ports. 

Size:  1/4" x 24 Elements                   10/Box

Get to hard to reach areas with a flexible hose.  Prevents uneven mixing of foundarion crack repair materials.  Fits tightly into surface ports and has a clamp to stop flow when moving between ports.

10/Box

Steel balls fit inside surface and corner ports and allow the concrete repair material to flow in one direction only.  Great for injecting materials overhead.

100/Bag

16 oz disposable mixing bowls are excellent for mixing Foundation Surface Sealer Epoxies.

50/Sleeve

The grease gun injects foundation crack repair materials at high pressures.  Use on extremely tight, difficult or previously repaired concrete cracks.

Drill in place packers are used with a grease gun to get concrete crack injection materials into a concrete crack.  Use for concrete cracks that are actively leaking water or have been previously repaired.  Rubber sleeve collapses upon tightening  to make a tight seal.

100/Bag

Drill in place packers are used with a grease gun to get concrete crack repair materials into a concrete crack.  Use for concrete cracks that are actively leaking water or have been previously repaired.  Rubber sleeve collapses upon tightening  to make a tight seal.

100/Box

Latex gloves keep hands clean of Polyurethane Crack Injection Foam and Epoxy Crack Injection Resin residues.

100/Box