Applied Technologies manufactures a premium polymer-modified asphalt foundation waterproofing product for any budget. Homeowners can rest assured that when their new home's foundation is coated with Applied Technologies' waterproofing, they will have a dry basement to convert to any use they desire.
Our products offer warranties ranging from 10-35 years on new residential construction when applied by our Select Waterproofing Contractors.
Applied Technologies manufactures a high performance foundation waterproofing material for any budget. When installed by a Select Waterproofing Contractor these products offer the highest levels of warranties in the industry.
What is Foundation Waterproofing?
Waterproofing is a protective membrane applied to the exterior side of a foundation wall. This membrane stops water from getting through the walls and into the basement interior. Spray application provides a seamless barrier that turns the interior into a dry basement. Without foundation waterproofing, water can seep through a foundation wall or through a crack in the foundation.
Foundation Waterproofing Must Do Three Things
According to the testing and approval criteria of the ICC-ES for foundation waterproofing, it must do three things:
- Span a crack in a foundation
- Withstand water under hydrostatic pressure
- Stop water vapor from entering a basement
All of Applied Technologies' waterproofing membranes meet these criteria.
Why Use a Polymer-Modified Foundation Waterproofing Membrane
1. Low cost of instalaltion and materials
2. Proven technology provides a long life span
3. Environmentally freindly.
4. Stops water leaks in basements
There are several different forms of foundation waterproofing on the market. The most common is polymer-modified asphalt. This is a liquid asphalt coating that has rubber polymers added. The rubber polymers enhance the asphalt to allow it to stretch over shrinkage cracks. Now water cannot penetrate into the basement even if the foundation cracks. Polymer-modified asphalt waterproofing membranes dry to form a seamless, smooth and continuous barrier to water.
Polymer-modified asphalt waterproofing has several advantages going for it. In addition to being highly effective, the cost of installation is very low compared to other waterproofing products. This is because since they are liquid, they can be sprayed onto a foundation wall at a high rate of coverage. One man hour of application will result in many more square feet of a foundation being treated compared to other types of waterproofing.
The cost of materials is also usually lower for liquid foundation waterproofing membranes. In fact the cost per square foot of installation can be 1/3 to ½ the cost of other waterproofing products.
Our foundation waterproofing materials have been on the market since 1998. They are a proven way to keep your possesions safe from water.
Most importantly, a foundation treated with our waterproofing products is guaranteed to be safe from leaks. You will experince a safe and healthy living space for you and your loved ones.
More Steps to Keep Your Basement Dry
Making a basement dry doesn’t just start with foundation waterproofing. There are other systems and features that need to be included as a building is being built to be sure the basement stays dry.
1. Foundation Drainage System
All waterproofing products need to have a functioning ground water drainage system in place. This is simply a perforated pipe that goes around the bottom of a foundation and either drains water to daylight, or if that is not possible, then collects the water in a sump pit. From there a sump pump removes the water from the foundation area.
The purpose of a foundation drainage system is to remove ground water that accumulates around a foundation and under the basement floor. Foundations that lack or have an improperly working foundation drainage system can have water actually enter the basement at the joint where the floor meets the foundation wall.
2. Soil Grading
In addition, the grade of the soil around the building should slope away from it. Grade that slopes towards the building can cause a pooling effect that can get above the area treated with waterproofing. When this happens, the water can enter any cracks in the foundation and enter the basement.