D-I-Y Kits for Concrete Floor and Slab Crack Repair

For use in repairing basement concrete floor cracks, concrete slab cracks, pool, decks, warehouses, driveways, sidewalks and patios. A-Tech 1300 is an ultra low viscosity, fast curing, self leveling polyurea that welds concrete cracks back together.
Concrete floors and slabs can crack after placement. This can allow water to enter from below, especially when in a basement. Or after applying an overlay, a "shadow crack" can transmit from the old slab through the new placement.
Spalling of concrete can happen due to heavy use or damage. This can be unsightly, especially when in a commercial application. It is possible to make a repair using a polyurea to quickly patch the surface.
A polyurea is a very fast setting material that can allow traffic to return to the repair area in a short time. Overlays can be applied in the same day as the concrete floor crack repair is made.
Filler Sand-Dry Silica Sand 4lb bagDry white silica sand for use with A-Tech 1300. Pour into wide cracks to build up A-Tech 1300. Will fill approximately 100-300' per bag depending on width.
Easy pour bag.
A-Tech 1300 is a fast setting polyurea used in repairing damaged, cracked or spalled concrete. It's ultra low viscosity allows it to penetrate tight cracks. Cure time is only 10-15 minutes, allowing little down time in the affected area. Once cured the product has a 4000 psi tensile strength. The product can be mised with sand aggregate to make a paste for use in spalls and voids.
DO NOT use in expansion joints.