Acricoat WB Decorative and Stamped Concrete Sealer

Non-Toxic Environmetally Friendly Water-based Concrete Sealer-Medium Glossy Wet Look
Acricoat WB is a non-toxic water-based acrylic concrete sealer used on decorative concrete to give a medium wet look. It is a UV resistant and non-yellowing sealer. Once dry the concrete will be protected from oil, grease, and water damage.
Concrete is commonly used to provide a long lasting decorative touch to homes, patios, garages, driveways and businesses. By stamping and staining the concrete, a contractor can mimic many expensive materials for a much lower cost.
Whether the concrete is dyed, stained or colored, it must be sealed to protect the coloring from wear caused by foot and vehicle traffic. Acrylic sealers are easy to use and are the most common concrete sealers.
Acricoat WB Acrylic Concrete Sealer
Acricoat WB is a high solids, water-based, non-yellowing, UV resistant concrete sealer. It forms a tough protective acrylic film that gives a medium gloss finish to enhance the color of stamped concrete. Acricoat WB can be used on both interior and exterior projects.
- Environmentally safe
- Low VOC content
- Extremely low odor formula
- Water-based
- No harmful solvents
- Medium gloss
- Non-yellowing acrylic film
Wet Glossy Look Concrete Sealer
Acricoat WB protects your concrete patio, driveway and sidewalk project from stains, foot traffic damage, oil and grease. Water and de-icing salt will not be able to get to into the concrete. This reduces spalling and pitting. Once dry the concrete will have a medium glossy wet look to it.
Environmentally Friendly Water-based Concrete Sealer
Acricoat WB is a truly green non-toxic product. It meets the most stringent environmental regulations in 50 states. The VOC content is <100 gm/L. Since there are no harmful solvents, it is not flammable and is safe for you and your family
Once Acricoat WB dries, your concrete project will have a glossy wet look to it.
FREE Shipping to 48 States on 5 Gallon Pails
Non-toxic water-based acrylic concrete sealer
Environmentally friendly 50 state VOC compliant. Water-based formula means there are no harmful solvents that can damage the environment.
1st Coat 300-400 sq. ft./ gallon
2nd Coat 400-600 sq. ft./ gallon
Medium gloss, water-based non-yellowing acrylic concrete sealer enhances and darkens colored, stained and dyed concrete.
Protects concrete from oil, grease, stains, de-icing salts and water damage. Ready to use, do not thin.
Hand Sprayer 1 Gallon
Professional grade pump up hand sprayer to apply A-Tech Hydra-Block
- Polyethylene construction
- Fan pattern spray tip for even application
- 1/4 gpm nozzle
- Wide funnel top
- 1 gallon usable capacity
Hand Sprayer 2 Gallon
Professional grade pump up hand sprayer to apply A-Tech Hydra-Block
- Polyethylene construction
- Fan pattern spray tips for even application
- 1/4, 1/3, 1/2 gpm nozzles
- Lock in place spray guard to protect siding
- Wide funnel top
- 2 gallon usable capacity
Acricoat WB Uses
Exterior Projects- Curing and sealing where a non-yellowing formulation is desired and water-based clean up is desired.
Interior Projects- Curing and sealing compound that meets ASTM C-1315 and the fumes of a solvent based would be objectionable.
Acricoat WB enhances the color of decorative and exposed aggragate concrete.
Where to Use Acricoat WB
- Concrete stamped floors
- Concrete walls
- Curing compound on fresh concrete
- Garages
- Exposed aggragate concrete
- Concrete patios
Acricoat WB Features
- Water-based formula
- Medium gloss
- Non-yellowing
- UV resistant
- Low VOC <100 g/L
- 50 State VOC compliant
- Fast drying
Acricoat WB Protects Concrete From
- De-icing salts
- Water
- Grease, oil, mild acids and alkalies
- Minimizes spalling from freeze-thaw cycles
- Dusting
- Hairline crack checking