A-Tech Masonry & Brick Sealer 5 Gallon Pail

 @ $177.95

FREE SHIPPING TO 48 STATES

 

Commercial Specifications Section 07 19 23

A-Tech Masonry & Brick Sealer is a silane/siloxane water repellent that prevents water penetration through masonry and concrete substrates according to ASTM-514 for 10% siloxane content at simulated driven rain at 62.5 mph. Any masonry substrate such as brick, or stone can be made water repellent using A-Tech Masonry & Brick Sealer.

A-Tech Masonry & Brick Sealer water repellent meets the National Cooperative Highway Research Program (NCHRP) Report 244 for the reduction of chloride ion (salt) content in concrete roadways caused by wintertime deicing salt application. Sealing the brick used for pavers in patios or sidewalks reduces salt uptake and helps ensure that your own brick driveway, sidewalk will be protected from spalling caused by deicing salts.

A-Tech Masonry & Brick Sealer is a water-based emulsion of siloxane and alkylaloxysilane. It penetrates into the substrate to form a waterproof hydrophobic barrier against water penetration. Upon penetrating into the substrate of the masonry or brick, it chemically bonds and fills the pores below the surface. The masonry or brick will be waterproof and protected from spalling, staining and mold and mildew growth.

However, A-Tech Masonry & Brick Sealer is 100% breathable and allows water vapor to escape. This means that the liquid water that can be absorbed from under or behind the substrate, such as from below brick driveways or sidewalks, will not be trapped inside. This will reduce the spalling and scaling that can occur from water being trapped inside the brick substrate and freezing during cold weather.

Because A-Tech Masonry & Brick Sealer penetrates below the surface of the brick the appearance will not change. Also, the original texture, feel and traction of the surface is maintained.

A-Tech Masonry & Brick Sealer Video


Where to Use A-Tech Masonry & Brick Sealer

  • Exterior areas
  • Vertical walls
  • Brick Chimneys
  • Horizontal areas

A-Tech Masonry & Brick Sealer Features

  • Natural look
  • No substrate appearance change
  • 10% siloxane and alkylaloxysilane solution
  • Skid and traction properties remain the same
  • Substrate is water repellent
  • Vapor permeable
  • Water-based formula
  • Penetrates below the surface
  • Horizontal or vertical use
  • VOC Content <200g/L

100% Vapor Permeable Masonry Sealer

A-Tech Masonry & Brick Sealer is 100% breathable and allows water vapor to escape. Liquid water, especially from wind driven rains, will stay out of the brick and masonry.  Water vapor from the interior of the building, or from the underside of pavers can escape. This will reduce efflorescence, spalling and scaling that can occur from water being trapped inside the brick substrate and freezing during cold weather.