Concrete Spall Repair Material

 @ $252.00

A-Tech 1300 SP is a high strength rapid set, low viscosity and solvent free polyurea used to repair spalls and cracks in concrete slabs and floors.  The long pot life makes A-Tech 1300 perfect for mixing with sand for large repairs.  A-Tech 1300 SP is used to repair control joints, broken joints and spalls.  It is excellent for use in non-moving concrete floors in warehouses, basements driveways, sidewalks and patios.  Dry filler sand can be added for increased UV protection and to match concrete color.

Polyurea for Concrete Spalls

The long pot life of A-Tech 1300 SP makes it an excellent repair product for large spalls in concrete.  A-Tech 1300 SP is a self leveling and priming material.  when mixed with sand it has a compressive strength of 4800 psi.

After repairing the spalls, an overlay can be placed the same day.  The repaired area will not "shadow crack" through the new overlay.


Filler Sand-Dry Silica 4 lb BagFiller Sand-Dry Silica 4 lb Bag

Dry white silica sand provides color match to concrete.  Mix with A-Tech 1300 for large repairs.


Mixing Sand 1:1

Sand: 4 oz

A-Tech 1300 SP: 4 oz

Yield: 7.2 oz

1:1 mix ratio of A-Tech 1300 SP and silica sand gives a self leveling and flowable product.


Mixing Sand 1.5:1

Sand: 6 oz

A-Tech 1300 SP: 4 oz

Yield: 8.8 oz

1.5:1 ratio is still flowable.  Ideal for larger repairs.


A-Tech 1300 SP Polyurea Advantages

A-Tech 1300 SP is a low viscosity material with a rapid cure time.  "Drive-over" time of 45 minutes allows short down periods while the area is repaired.  The 10 minute pot life allows excellent workability for the user.

  • 100 % Solids
  • No VOCs
  • Meets USDA and FDA food requirements
  • "Drive-over" time 45 minutes
  • Self leveling
  • 10 minute pot life
  • Cures from -20 - 130 degrees F

Where to Use A-Tech 1300 SP

  • Concrete spalls
  • Concrete driveways
  • Concrete sidewalks
  • Exterior or interior concrete spalls
  • Warehouse floors
  • Pools
  • Decks
  • Concrete slabs