Dowel Rod Epoxy

Dowel rod epoxies securely anchors steel re-bar,dowels and bolts used for concrete repair, concrete construction and concrete additions. Anchoring epoxy provides a structural bond between the different sections of concrete being poured.

 

Set and embed dowel rods, rebar and anchor bolts into existing concrete.

A-Tech Anchor SetA-Tech Anchor Set

@  $205.00

6 Cartridges/Case

300cc x 300cc Cartridge (11 oz x 11 oz)

Mixes 1:1

A-Tech Anchor Set is a 100% solids, high modulus, structural epoxy gel. Moisture insensitive, no odor and high strength formula.

Where to use:

  • Load bearing bolts and anchors
  • Non-load bearing
  • Fresh Concrete to Cured Concrete
  • Cured Concrete
  • Precast segments with internal tendons

 

Hi Mod Gel meets:

  • ASTM C- 881-90 Type I, II, IV V
  • Grade 3 (non sag)
  • Class B & C (temperatures 40-60+ deg. F)
  • AASHTO-M 235-90

 

Physical Properties:

PropertyTestResult
 Tensile Stength
 ASTM D-638
 6,000 psi
 Tensile Elongation
 ASTM D-638 3-4%
 Compressive Strength
 ASTM D-695

13,500 psi

 Bond Strength
 ASTM C-321
 2,400 psi
 Flexural Strength
 ASTM D 790
 8,000 psi
 Deflection Temp
 ASTM D-648
 1900 F

 

Use Turbo Static Mixer for mixing

 

Use a Spring Drive Injection Gun to dispense

Turbo Static MixerTurbo Static Mixer

@  $34.20

6/Box

 

  • Large size for mixing A-Tech Anchor Set
  • Large diameter for easy mixing of thick material
  • 15"" Long to reach the bottom of dowel rod holes
  • 18 mix elements for thorough mixing