100-150 sq. ft./gallon
FREE SHIPPING to 48 STATES on PAILS
Natural look concrete sealer. Traction, texture and sheen of substrate remains unchanged.
Penetrating water-based silane/siloxane water repellent leaves no surface film to wear away and maintains surface texture.
Ready to use water-based silane/siloxane A-Tech Concrete Sealer. Apply with brush, roller or sprayer. Do not thin. Traction, texture and sheen of substrate remains unchanged.
Coverage sq.ft./gallon
Clay Brick, Exposed Aggregate, Stucco, Rough Stone 100-150
Precast Concrete 125-150
Smooth Stone and Glazed Brick 150-175
Concrete 80-150
Concrete Block 60-90
Meets the National Cooperative Highway Research Program (NCHRP) Report 244 for the reduction of chloride ion uptake
Uses for A-Tech Concrete Sealer
For use on vertical and horizontal surfaces
*Not for use on colored concrete
Advantages
Penetrating Silane/Siloxane Water Repellent
A-Tech Concrete Sealer is a water-based emulsion of siloxane/alkylaloxysilane concrete water repellent. The concrete sealer penetrates below the surface of the concrete to seal it against water penetration. The Silane/siloxane reacts with the concrete to fill the microscopic pores inside it to form a hydrophobic barrier against water. The concrete will be sealed against water and resist spalling, staining and efflorescence.
De-Icing Salt Protection for Concrete Driveways and Sidewalks
A-Tech Concrete Sealer meets the National Cooperative Highway Research Program (NCHRP) Report 244 for the reduction of chloride ion (salt) content in concrete roadways caused by wintertime deicing salt application. Sealing the concrete reduces salt uptake and helps ensure that your own concrete driveway, sidewalk or patio will be protected from spalling caused by deicing salts.
Breathable Protection
A-Tech Concrete Sealer is 100% breathable which will allow any water inside the concrete to evaporate out of it. This greatly reduces the concrete's chances of spalling. Water that is trapped in the concrete can expand upon freezing and cause the concrete to spall.
Invisible Finish
Because A-Tech Concrete Sealer is a penetrant, the concrete surface will not darken or have a wet, shiny finish. The natural texture and and traction of the concrete is maintained.
Active Content
10% water-based oligmoerous alkylakoxy siloxane
NCHRP Report 244
94% Reduction in chloride ion content
Vapor Transmission
Excellent. No moisture retained after 21 days.
Water Penetration through Masonry ASTM E-514(10% Siloxane) with simulated wind driven rain at 62.5 mph (100.6 kph.)
Average reduction 100%.
