, ,

20′ Fast Set Concrete Foundation Crack Repair Kit

$276.59 USD

  • Stop leaks in up to 20′ of foundation crack
  • Same materials the pros use
  • Easy to use instructions and video
  • Fills all voids in the concrete crack
  • All work from the interior
Buy now on Amazon
SKU: AT­-2W543214 Categories: , ,

Select a tab for more product information:

2x The Material as the 6-10′ Fast Set Kit

This kit has twice the materials as the standard 10′ Fast Set Concrete Foundation Crack Repair Kit.

Repair the leak in 12-20′ of concrete foundation cracks. Typically takes one hour for each crack.

Now novices and pros alike can stop leaks in concrete foundation cracks. Hydra stop 300 is a non-shrinking urethane grout that expands inside the crack. This fills all voids and stops the water from coming in.

Poxy Paste is the fastest setting port adhesive and crack seal product available in a DIY kit. Low odor and safe to use, this kit will give professional results at the fraction of the price.

Kit Includes

  • 4 cartridges Poxy Paste Crack Seal & Port Adhesive
  • 4 Static mixers
  • CD-ROM instructional video
  • 20 wooden stir sticks
  • 30 surface ports
  • 20 Corner ports
  • 4 cartridges Hydra Stop 300 Injection Polyurethane Resin
  • 1 Flexible injection hose assembly
  • Safety glasses
  • 8 pair nitrile gloves
  • 1 wire brush
  • 1 Water bottle
  • 1 drop cloth/trash bag
  • 1 caulk gun

Application & Coverage

Suitable for application in concrete cracks 1/32” to 1/4” in width. Concrete should be above 40 F. Can be used to stop leaks in dry or wet cracks. Surface of the concrete must be dry for use.

Where to Use

  • Cracks wider than 1/32″ (thickness of a fingernail)
  • Concrete cracks in basement walls
  • Retaining walls
  • Sewers

Repair Process

Hydra Stop 300 is a low viscosity liquid polyurethane. Once inside the crack, the Hydra Stop begins to foam and expand. This expansion completely fills the crack and stops water.Step

1. View CD-Rom video included with the kit

2. Attach surface or corner ports over the foundation crack using Poxy Paste Crack Seal & Port Adhesive

3. Cover the entire foundation crack with Poxy Paste Crack Seal & Port Adhesive

4. Inject liquid Hydra Stop 300 polyurethane crack injection resin into the foundation crack with a caulk gun

5. Place caps into the surface or corner ports to seal them

You may also like…